2023 SCAG Power Equipment SFC SFC30-7CV-S

Check Availability Hi, my name is and I'm interested in this 2023 SCAG Power Equipment SFC SFC30-7CV-S . I'm in the area and you can reach me at or on my phone at .

2023 SCAG Power Equipment SFC30-7CV-S

FINISH CUT WALK-BEHIND

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Features may include:

MOW WITH EASE

FRONT SWIVEL CASTER WHEELS

  • Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

FULLY FABRICATED AND WELDED STEEL CUTTER DECK

MILITARY-GRADE STEEL - DECK

  • Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and ¼” side reinforcement bar, all while delivering the quality-of-cut you’d expect from a Scag mower.

FULLY FABRICATED AND WELDED STEEL FRAME

MILITARY-GRADE STEEL - FRAME

  • Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.

SINGLE POINT HEIGHT-OF-CUT ADJUSTMENT

FINE-TUNED AND SIMPLE

  • Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5” to 5” in .25” increments.

OFFSET BLADE SET UP

SIMPLIFIED DECK DRIVE SYSTEM

  • An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.

SCAG LEVEL QUALITY-OF-CUT

UNMATCHED PERFORMANCE

  • The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.

OPERATOR CONTROL PANEL

ERGONOMIC CONTROLS

  • Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.

OVERSIZED ADJUSTABLE CONTROLS

ACHIEVE MAXIMUM COMFORT

  • Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.

DISCHARGE – MULCH – BAG

3-IN-1 VERSATILITY

  • The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag

POWERFUL TRANSMISSION & ENGINE COMBO

MAXIMUM POWER FOR TOUGH CUTS

  • The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.

Engine

  • Engine:
    Kohler 224CV engine – recoil-start engine, Swivel Front Caster

Dimensions

  • Fuel Capacity:
    1 gallon
  • Weight:
    Bagging: 233 lbs. | Mulching: 227 lbs. | Discharging: 226 lbs.
  • Length:
    Minimum (handles in highest operating position): 69" | Max (handles in lowest operating position): 76.5"

  • Cutting Width:
    30"
  • Parking Brake:
    Hand lever
  • Width:
    (w/ discharge chute): 36.75" | (w/ discharge block off plate): 31.5" | Tracking: 28.75"
  • Features:
    Deck: Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup. | Deck Lift: Hand lever. Single-point adjustment. | Deck Construction: 14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts. | Blade: Optimized for maximum performance whether discharging, mulching or bagging | Discharge, Mulch, Bag: Standard
  • Height:
    Lowest Operating: 36.75" | Max Operating: 45.25" | w/ Handle Bar in Storage Position: 57.5" | Cutting: 1.5" to 5" in .25" increments.
  • Drive system:
    GT MV 702 Transmission
  • Bag:
    2.5 Bushels
  • Spindle Type:
    Aluminum housing with sealed ball bearings.
  • Transport Length:
    (handles in upright transport position): 44"
  • Tires, Front Specification:
    9” x 2.25” rubber tire w/ glass-filled polypropylene wheel
  • Tires, Rear Specification:
    10.5" x 3" rubber tire w/ glass-filled polypropylene wheel
  • Top Speed:
    Forward: Up to 4 mph

Other

  • Manufacturer Type:
    Walking

Our Location


Wise Honda
2803 S US-287
Decatur, TX 76234