2023 Exmark Vertex S-Series VXS740AKC48400

Check Availability Hi, my name is and I'm interested in this 2023 Exmark Vertex S-Series VXS740AKC48400 . I'm in the area and you can reach me at or on my phone at .

2023 Exmark Vertex S-Series VXS740AKC48400

The all-new Vertex stand-on zero-turn mower is ready to take your productivity and profitability to the next level. With a design that centralizes mass low in the mower chassis, Vertex is ultra-maneuverable, yet stable and easy to control. The control panel is ergonomically designed and centrally located to improve operator comfort. Exmark's proven hydro drive system delivers ground speeds of up to 8.5mph, enabling Vertex to quickly finish large jobs. Built with a Kawasaki V-Twin or Kohler EFI engine to increase fuel efficiency so you can stay out in the field longer. Choose from 48-, 52-, or 60-inch UltraCut Series 4 side-discharge cutting decks, featuring easy rake adjustment and anti-scalp rollers, for an Exmark signature finish cut quality every time.

Features may include:

Design Simplicity
  • Operating a Vertex mower is easy, thanks to the simple, ergonomic design. Key, choke, throttle, height of cut adjustment...they're all right there. Hop on, and you're ready to go.
Operator Comfort
  • Designed to place the operator in a position of comfortable control. The wide, open platform offers more room for the operator to adjust their stance, while the ergonomic control panel places all vital controls close for easy reach and operation.
Cut Quality
  • All models are equipped with Exmark UltraCut Series 4 side-discharge cutting decks. The decks feature flow-control baffles, anti-scalp rollers, and a rod-style floating deck design for easy deck rake adjustments. The result is a signature cut quality on any turf type.
Reduced Maintenance
  • With no in-season grease points, flat-free semi-pneumatic front caster tires, and maintenance-free sealed bearing cutter housings, Vertex S-Series is designed to minimize in-season maintenance and the downtime that goes with it.
Reduced MaintenanceEase Of Service
  • These units are easy to service thanks to the tools-free access to the engine and hydro drive components. The reliable single-belt drive system is simple and easy to maintain, and Exmark’s patented spherical idler bearings require only annual lubrication.
Commercial Engine
  • Choose from a fuel-saving EFI Kohler or carbureted Kawasaki commercial engine. Both engines feature heavy-duty canister-style air filtration systems and pressurized lubrication for maximum durability in daily commercial use.
Tool-less Belt RemovalTool-less Belt RemovalDeck and hydro belt can be installed without using any tools.

Engine

  • Displacement:
    747
  • Fuel system:
    Electronic Fuel Injected

Dimensions

  • Fuel Capacity:
    8-gallon (xx.x-L), single fuel tank on LH side.
  • Weight:
    Curb: 925
  • Length:
    65.33" | 3 Blades at 16.25"

  • Emissions:
    Command™ EFI
  • Cutting Width:
    60"
  • Electrical:
    12-volt battery with 15-amp alternator.
  • Parking Brake:
    Lever-actuated bar brake.
  • Width:
    60.05"
  • Features:
    Tractor Frame: Welded, heavy-duty 1.5" x 2.5" tubular steel. | Casters: .50 thick caster yoke arms with tapered roller bearings | Floating Deck
  • Air Filter:
    Heavy-duty canister air filtration system
  • Safety Features:
    Operator Presence Controls (OPC) with safety interlock system indicators
  • Engine Manufacturer:
    Kohler ECV740
  • Operating Speed:
    Infinitely variable speed selection 0–8.5 mph (x.x kmph) forward, 0–x.x mph (x.x kmph) reverse
  • Height:
    49.2" | Cutting: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from operator’s platform.
  • Construction Material, Deck:
    Single point HOC; with mechanical lift-assist springs. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Drivetrain:
    Two Hydro-Gear 12 cc pumps powering two Parker 14.5 cubic inch motors. | Allows unit movement without engine running.
  • Rated Engine Speed:
    3,750 rpm
  • Spindle Type:
    No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
  • PTO Type:
    Warner 200 ft-lb clutch
  • Steering:
    Twin levers with center fixed reference bar for ease of control forward and reverse
  • FUEL TYPE:
    Gas EFI
  • Tires, Front Specification:
    13 x 5.0-6, smooth-tread, semipneumatic tires with tapered roller bearings. | Drive Tires: 20x10.0-8 Carlisle Turf Master
  • Top Speed:
    Approximately 18,500 fpm.

Other

  • Manufacturer Type:
    Walking

Our Location


Wise Honda
2803 S US-287
Decatur, TX 76234