2023 Exmark Staris E-Series STE600CKA363H1

Check Availability Hi, my name is and I'm interested in this 2023 Exmark Staris E-Series STE600CKA363H1 . I'm in the area and you can reach me at or on my phone at .

2023 Exmark Staris E-Series STE600CKA363H1

Available with a choice of 32-, 36- or 44-inch UltraCut Series 3 cutting decks, Staris E-Series commercial stand-on mower strike the perfect balance of productivity and value. The compact size of the 32-inch model allows it to fit through 36-inch gates and into tight spaces - a must for commercial mowing. A top ground speed of 10 mph enables landscape pros to mow more properties, more quickly, without the fatigue typically experienced with a small walk-behind mower. A large, open operator platform allows for easy step-on step-off. Constructed from heavy-duty tubular steel, Staris frames feature the same wall thickness as our industry-standard Lazer Z zero-turn riders. Proven Kawasaki V-twin commercial engines feature cast-iron cylinder liners, pressurized lubrication and a rotating grass chopper screen to minimize debris in the cooling system.

Features may include:

Cut Quality
  • The Staris E-Series features proven UltraCut Series 3 decks delivering Exmark's signature quality of cut.
Drive System
  • The trusted pump and wheel motor combination provides commercial durability and smooth control. The system utilizes hard hydraulic lines reducing potential leak points, improving durability and hydro-oil cooling.
Serviceability
  • The flip up front cover gives operators easy access to perform routine lawn mower maintenance and cleaning, without the need for tools. The rear cover lifts and locks into place providing easy access to check and fill both engine oil and hydro fluid.
Commercial-Grade Engine
  • Kawasaki commercial-grade engines are featured on the Staris E-Series.
Compact Design
  • The compact size reduces trailer space and storage and gives the ability to access more yards, more quickly, while providing exceptional maneuverability on tough terrain.

Engine

  • Displacement:
    603
  • Fuel system:
    Carbureted | Indicator: Float Gauge

Dimensions

  • Fuel Capacity:
    5-gallon (18.9-L)
  • Weight:
    Curb: 737
  • Length:
    Blades: 2 Blades at 22.25" | 61.7
  • Dimensions:
    Casters: .38

  • Emissions:
    Series: V-Twin
  • Cutting Width:
    Deck: 44"
  • Electrical:
    12-volt battery with 15-amp alternator.
  • Parking Brake:
    Lever-actuated bar brake.
  • Air Filter:
    Standard Engine Manufacturer's air filter
  • Safety Features:
    Package: Operator Presence Controls (OPC) with safety interlock system indicators
  • Engine Manufacturer:
    Kawasaki
  • Operating Speed:
    Forward: 0–7.5 mph (12.1 kmph) | Reverse: 0–4.0 mph (6.4 kmph)
  • Height:
    Cutting: 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.50" (1.27 cm) increments | 47.1
  • Construction Material, Deck:
    Style: Floating Deck | Style Description: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt | Full-floating UltraCut Series 3. Side discharge standard, with flexible discharge chute and option to bag or mulch.
  • Drivetrain:
    Hydro-Drive | Description: Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors.
  • Rated Engine Speed:
    3,600 rpm
  • PTO Type:
    Engagement: Warner 105 ft-lb clutch
  • Steering:
    Control: Twin levers with adjustable front reference bar to modify forward ground speed.
  • FUEL TYPE:
    Gas Carbureted
  • Frame Type:
    Frame: Welded, heavy-duty 1.5" x 3" tubular steel.
  • Tires, Front Specification:
    21x8.50-10 Kenda K505 | Caster: 9 x 4.50-5, smooth-tread, semipneumatic tires with sealed ball bearings.
  • Tires, Rear Specification:
    21x8.50-10 Kenda K505
  • Top Speed:
    Blade: Approximately 18,500 fpm.
  • Spindle Diameter:
    Cutter Housing: 7.75" | Blade Driver: 1.75" | Shaft: 1.0"

Other

  • Manufacturer Type:
    Walking

Our Location


Wise Honda
2803 S US-287
Decatur, TX 76234