2023 Cub Cadet Stand-On Mowers PRO X 654

Check Availability Hi, my name is and I'm interested in this 2023 Cub Cadet Stand-On Mowers PRO X 654 . I'm in the area and you can reach me at or on my phone at .

2023 Cub Cadet® Stand-On Mowers PRO X 654

Features may include:

  • Commercial-grade 25.5 hp Kawasaki(R) FX801V (852cc) engine
  • A fully fabricated 54-inch 10-gauge steel commercial deck shell with top bottom and side reinforcements plus standard 24" tires give you more ground clearance to easily hop on curbs.
  • A large, fully adjustable suspension platform allows you to adjust tension and glide comfortably through tough terrains.
  • High-performance commercial Hydro-Gear® PK 12cc pumps & Parker® TL 240cc wheel motors deliver quick response to the drive wheels and smooth control for cutting speeds up to 10 mph.
  • 3-year limited commercial warranty (no hour limitations) and 5-year/1,750-hour limited deck assembly warranty.

Engine

  • Displacement:
    852cc
  • Engine:
    FX Series 801V

Dimensions

  • Fuel Capacity:
    7.5 gal. US (28.4 L)
  • Weight:
    1080 lbs
  • Length:
    69"
  • Oil Capacity:
    2.0 qt. US (1.89 L)

  • Cutting Width:
    Deck: 54 in
  • Lubrication:
    Fully pressurized
  • Charging System:
    15 amp regulated
  • Warranty:
    3-year / no-hour-limit warranty | Deck Shell Warranty: 5-year / 1,750 hour limited manufacturer’s warranty
  • Width:
    68"
  • Choke:
    Separate Choke
  • Features:
    Deck Engagement (PTO): Electronic with quick reset | Blade(s): Three 19" long high-lift Marbain blades, 1-1/2" of blade overlap | Deck Lift: Hand lever adjusting spring lift, pin selector for height | Anti-Scalping: 2 front deck gauge wheels | Front Axle: 2" x 3" tube construction | Front Caster Mount: 3/8" thick steel
  • Brake System Type:
    Hand lever control / external band
  • Steering Wheel:
    Lap Bar Steering Wheel Control
  • Air Filter:
    High Density
  • Engine Manufacturer:
    Kawasaki®
  • Cylinder Liners:
    Twin
  • Operating Speed:
    Forward Speed 10 mph / 16 km/h | Reverse Speed 5 mph / 8 km/h
  • Height:
    56" | Cutting Range: 1.5”- 4.5”
  • Construction Material, Deck:
    10-gauge steel | 10 ga shell w/ 7 ga top & bottom reinforcement
  • Spindle Type:
    HD 8" aluminum housing, 35mm double-row sealed ball bearings, 1-3/8" through-shaft and maintenance-free design
  • Engine Power:
    25.5HP
  • Starter:
    Electronic Ignition Key
  • FUEL TYPE:
    Carburetor
  • Frame Type:
    2" x 3" full-length tube frame
  • Tires, Front Specification:
    13x5-6" Reliance Run Flat carlisle
  • Tires, Rear Specification:
    24"x12"-12"

Other

  • Suspension:
    Hand lever adjust, 3-position spring suspension foot platform
  • Manufacturer Type:
    Stand-On

Our Location


Wise Honda
2803 S US-287
Decatur, TX 76234