2021 Virnig Manufacturing V70 Tree Disc Mulcher TDM60

‹ ›

Reset Zoom

‹ › + -

‹ ›

Efficiently mulch 6-8” diameter trees and quickly remove up to 14” diameter trees.

DIRECT DRIVE SYSTEM WITH PISTON MOTOR

Premium drive components including bent-axis piston motor provide optimum performance and longevity.

BEARING & SPINDLE PROTECTION

Low-pressure relief helps prevent spindle seal failure. Spindle shaft guard prevents debris from damaging spindle seals and bearings.

FULLY-MACHINED DISC

60” disc contains no welds and is made with 1 ¼” thick, high-strength steel.

ROTATABLE, REPLACEABLE TEETH

44 Quadco® four-sided bolt-on teeth can be rotated and replaced to increase wear life. Bolt-on tooth mounts also replaceable

RECUTTER BAR

Three deck mounted teeth and recutter bar help prevent jams, improve mulching and produce a finished look.

HEAVY-DUTY DECK

Interior deck weldments utilize, at minimum, 1/4” thick, grade 80 steel.

EASY PART REPLACEMENT

Bolt-on push bar, intake chute and discharge deflector can be replaced with ease.

Weight:
Approximate (Pounds): 2710
Dimensions:
Cutting Capacity, Diameter (Inches): 14 | Maximum Disc Thickness (Inches): 1.25 | Deck Thickness: Top, Side / Inside (Inches): 0.25 / 0.375¹

Cutting Width:
(Inches): 60.0
Hydraulic Flow:
Recommended Rate (GPM): 30-45 High Flow Only
Features:
Number of Teeth: Top / Bottom / Outside: 12 / 20 / 12
Overall Width:
(Inches): 70.0
Height:
Deck (Inches): 11.0 | Push Bar (Inches): 40.5 | Minimum Cut (Inches): 2.1
Depth, Maximum:
Overall (Inches): 77.5
Load Capacity, Land:
Recommended: Greater than 2800 pounds
Overall Height:
(Inches): 40.5