2021 Virnig Manufacturing V50 Skeleton Tine Grapple STG84
2021 Virnig Manufacturing V50 Skeleton Tine Grapple STG84
Two-cylinder independent grapple that reaches tine tips for fine work.
- Every tine is constructed from one piece of 1/2" Grade 80 steel, from tip to top brace, to add rigidity
- Fully gusseted tines with no cross member allowing better material penetration without compromising strength.
- NitroSteel® cylinder rods and Teflon® coated bushings on all pivots.
- Standard with Cylinder Guards.
Dimensions
- Weight:Approximate (Pounds): 1010
- Dimensions:Grapple Jaw Opening (Inches): 36.4 | Cylinder Pins / Hinge Pins Diameter (Inches): 1.25 / 1.563 | Space Between Tines (Inches): 9.3 | Tine Thickness (Inches): 0.5 | Cylinder Bore / Stroke (Inches): 2.0 / 8.375
- Features:Number of Tines (With Sides): 10
- Overall Width:(Inches): 86.0
- Depth, Maximum:Overall (Inches): 36.5
- Load Capacity, Land:Recommended: Greater than 1500 pounds
- Overall Height:Bucket (Inches): 27.5 / 21.1
Other
- Manufacturer Type:Root Grapples
