2021 Exmark Turf Tracer X-Series EFI TTX650EKC60400

Check Availability Hi, my name is and I'm interested in this 2021 Exmark Turf Tracer X-Series EFI TTX650EKC60400 . I'm in the area and you can reach me at or on my phone at .

2021 Exmark Turf Tracer X-Series EFI TTX650EKC60400

Large properties. Small properties. Tight spaces. Ornate landscaping. Whether you’re looking for a large walk behind with all of the bells and whistles or something a bit more modest, the Turf Tracer EFI X-Series is the family to turn to. All Exmark walk-behinds are designed to be incredibly productive, delivering a one-of-a-kind cut with each pass. These machines are built to last, taking on the toughest mowing conditions without breaking a sweat. They’ll have you easily maneuvering on hillsides, around flower beds, and anything else that can end up on the lawn. These EFI mowers are available with 52- or 60-inch cutting decks.

Features may include:

Eco-Friendly
  • Reduces fuel consumption, fewer emissions and carbon footprint.
Reduce Green House Gases
  • Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
Engine Efficiency
  • Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
Fuel Savings
  • Delivers up to 25% in fuel savings.
Easy to Start
  • Easy start in any altitude or climate condition (no manual choke).
Sequential Fuel Injection
  • Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.

Engine

  • Displacement:
    694
  • Fuel system:
    Electronic Fuel Injected

Dimensions

  • Fuel Capacity:
    5-gallon (18.9-L)
  • Weight:
    Curb: 760
  • Length:
    Blades: 3 Blades at 20.5" | 84.8 in.
  • Dimensions:
    Casters: .38"

  • Emissions:
    Series: Command™ EFI
  • Cutting Width:
    Deck: 60"
  • Electrical:
    12-volt battery with 20-amp alternator.
  • Parking Brake:
    Lever-actuated mechanical compression.
  • Width:
    73.0 in.
  • Air Filter:
    Heavy-duty canister air filtration system
  • Safety Features:
    Package: Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
  • Engine Manufacturer:
    Kohler
  • Operating Speed:
    Fordwad: 0– 6.75 mph (10.9 kmph) | Reverse: 0–2.25 mph (3.6 kmph)
  • Height:
    Cutting: 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | 45.0 in.
  • Construction Material, Deck:
    Style: Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
  • Drivetrain:
    Hydro-Drive | Description:  Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54cm) tapered shafts.
  • Rated Engine Speed:
    3,600 rpm
  • PTO Type:
    Engagement: Electromagnetic 200 ft-lbs clutch.
  • Steering:
    Control: Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
  • FUEL TYPE:
    Gas EFI
  • Tires, Front Specification:
    18 x 8.5-8, 4-ply Turf Master® | Caster: 11 x 4.0-5, smooth tread, semi-pneumatic.
  • Tires, Rear Specification:
    18 x 8.5-8, 4-ply Turf Master®
  • Top Speed:
    Blade: Approximately 18,500 fpm.
  • Spindle Diameter:
    Cutter Housing: 7.75" | Shaft: 25mm (.98")

Other

  • Manufacturer Type:
    Zero-Turn Mower

Our Location


Wise Honda
2803 S US-287
Decatur, TX 76234