2021 Exmark Lazer Z S-Series LZS749AKC724A1

Check Availability Hi, my name is and I'm interested in this 2021 Exmark Lazer Z S-Series LZS749AKC724A1 . I'm in the area and you can reach me at or on my phone at .

2021 Exmark Lazer Z S-Series LZS749AKC724A1

With the top-rated Lazer Z S-Series of zero turn riders, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut' Series 4 cutting deck sizes are available in 52, 60 or 72 inches. Want tough? Try a 10-gauge, formed and continuously seam-welded top and a 7-gauge side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers. Select Lazer Z S-Series models offer Smart Controller. This easy-to-use interface has a wealth of user data like fuel level, interlock status, PTO and total hours, maintenance reminders and machine health status.

Features may include:

Doing More With Propane
  • Our EFI system optimizes fuel delivery in real-time, which improves efficiency and performance. This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers.
Built to Last
  • Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.
Fewer Grease Points
  • With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
Tool-less Belt Removal
  • Deck and hydro belt can be installed without using any tools.
Less Time At The Pump
  • Gas-powered S-Series models have a single 12-gallon tank with one fill location.
On-Board Diagnostics
  • Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
Ultracut Series 4 Deck
  • This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Engine

  • Displacement:
    747
  • Fuel system:
    Fuel Indicator: Electronic Sender

Dimensions

  • Fuel Capacity:
    12-gallon (45.4-L)
  • Weight:
    Curb: 1305
  • Length:
    Blades: 3 Blades at 24.50"| 86.1 in. (218.7 cm)
  • Dimensions:
    Casters: .50"

  • Emissions:
    Series: Command™ EFI
  • Cutting Width:
    Deck: 72"
  • Electrical:
    12-volt battery with 20-amp alternator.
  • Parking Brake:
    Lever-actuated disc brake.
  • Width:
    84.9 in. (215.6 cm)
  • Air Filter:
    Heavy-duty canister air filtration system
  • Safety Features:
    Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Engine Manufacturer:
    Kohler
  • Operating Speed:
    Forward: 0–10.0 mph (16 kmph) | Reverse: 0–6.0 mph (9.7 kmph)
  • Height:
    Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) | 70 in. (177.8 cm)
  • Construction Material, Deck:
    Style: Floating | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • Drivetrain:
    Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Rated Engine Speed:
    3,750 RPM
  • PTO Type:
    Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Steering:
    Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Seat Type:
    Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • FUEL TYPE:
    Gas EFI
  • Frame Type:
    Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Tires, Front Specification:
    24 x 12-12, 4 ply Turf Master® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
  • Tires, Rear Specification:
    24 x 12-12, 4 ply Turf Master®
  • Top Speed:
    Blade: Approximately 18,500 fpm.
  • Spindle Diameter:
    Blade Cutter Housing: 7.75" | Blade Shaft: 25mm(.98")

Other

  • Manufacturer Type:
    Implement / Attachment

Our Location


Wise Honda
2803 S US-287
Decatur, TX 76234